Sanipro XR Macerator Pump

Sanipro - for an en suite shower room in a basement, loft conversion or extension. Takes waste from WC, shower and wash basin.

Designed to enable the addition of an en-suite shower room, Sanipro will take the waste from a WC, shower cubicle and wash basin and pump it quickly and quietly through 22mm small bore pipework to a remote soil stack or sewer.
Sanipro has also recently received the ‘silent’ makeover and been fitted with an integrated carbon filter in its elegant new casing.

Sanipro is easy and economical to install, works with any style of sanitaryware (EN33 or EN37) and can be concealed behind a demountable panel to give access if required.

Sanipro takes waste from:
A single WC
Washbasin
Shower
Power shower
Hydromassage
Bidet
Can be fitted with Sanialarm

Specifications

Motor: induction motor (no carbon brushes or gears to wear out). Tested over 30,000 cycles.
Watts (consumption): 400w
Electrical supply: 220-240V 50Hz
Flow rate at max head l/min: 55
Discharge: (vertical height is measured from floor level) horizontally to 100 metres or vertically to 5 metres
Gravity fall on horizontal installations: 1/200
Discharge Pipe Diameter: 22mm
Construction Materials: Polypropylene, C.R.P., stainless steel, Neoprene
Type of WC Pan: (not included) Short spigot 100mm HO outlet (BS EN 33/37)
Motor RPM: 2800 RPM
Normal Running Time WC: 10 20 secs approx or as required, to discharge shower etc
Dimensions: 413W x 265 O/H x 178D (requires 200mm behind spigot)

Note: Designed to fit BS EN 33/37 WC pans. As close coupled cistern dimensions vary, it may be necessary, with certain designs, to utilise a spacer between cistern and wall.