450 Litre Package Sewage Pumping Station – 610mm x 1500mm

Mini+ Sewage Pumping Station – 610mm x 1500mm with 3 year warranty– 450 litre, a all in one Package Sewage Pumping system suitable for pumping foul waste water / Sewage water where a normal gravity drain is not possible, For Domestic use & light commercial use this single pump package sewage station comes complete and ready to go & available in many sizes for Maximum sewage removal / storage

Offers a easy solution to pump waste water / Sewage where gravity flow is not possible, Easily pump waste from Sinks, Baths, Showers, Toilets, Washing Machines and much more, The Sewage Pumping Station  can be installed in a Basement, Outbuilding, Garage Or wherever required,  

Specially designed for easy instillation The single pump sewage pumping station consists of a heavy duty stainless steel submersible sewage vortex pump with 50mm solid handling

Pumping Distance

6 Meter Maximum Vertical Lift

80 Meter Maximum Horizontal Flow

Need More Lift? Upgrade to 10 / 16 meter lift pump (choose option above)

Tank Size

450 Litre – 610 mm Width | 1500 mm Height  

Features

Non – Clogging Vortex Impeller

10 Meter Cable

Float Switch Included

Single Phase 240v 

Polyethylene Tank Chamber

HDPE pumping chamber

450mm diameter lockable pedestrian rated lid

Dab Feka VS 750 foul handling pump complete with float switch and 3 year warranty

Non-return valve

Tank adaptor complete with sleeve to connect to the external 63mm MDPE pipe

1no. 110mm inlet seal

High Water alarm is a optional extra however this is recommended

__________

• 450L capacity.
• Screw down lid (Pedestrian rated)
• 1 x 110mm/160mm inlet seal to allow inlet to be drilled on site.
• 40mm cable duct.
• 2″ internal pipe work
• 2″ non-return valve
• 2″ quick release coupling
• 2″ cable duct
• Special audible/visual high level alarm control box available.

Specifications of the Pump:

• Single phase, 50Hz, 240 Volts
• Rated current 9.5A
• Max Flow Rate 5.5 litre Per Second
• 50mm NPT discharge with 50mm solids handling capacity
• Suitable for connection to 63mm MDPE outlet pipe
• Poly moulded basin with PSF cover
• Integral foam seal
• Stainless steel bolt kit

Manufactured and produced in Nottingham UK

Please note – There must be 450mm below the bottom of the inlet pipe to allow for the pump to operate in all the options quoted.

All our pumping stations comply BS EN 12050-1:2001 / BS EN 752-6:1998 standards.

Available in 6 sizes

Upgrades Available 

Extra Head Lift Upgrade, 10 Meter or 16 Meter maximum vertical lift

Please Note: If you require more pumping distance please call our sales team and we will be happy to discuss more options & pump upgrades available, We can manufacture to any specific requirements